The Dryer is 2 metres high, so you can walk underneath, and 2.5 metres long, to accept a double sheet.
In section, it is an equilateral triangle, width 2.3 metres.
The frame is of 31.75 mm OD pre-galvanised steeel tube of 1.5 mm wall thickness. The ridge plate, inserts and nuts and bolts are Bright Zinc Plated.
The tent pegs are of 12.5 mm steel bar, 345 mm long, hot dip galvanised.
The cover and ballast bags are of woven/coated polyethylene, UV stabilised, rot proof, fire retardant, and 100% recyclable.
The lines are of 5 mm polycore, 8 lines each side, nominal length 16 x 2.5 = 40 metres. The actual length is reduced a little by the cover flaps.
We retain the right to change this specification in the light of experience.
|
|
